Goals
=====
* Operate in all VHF, UHF+, and 10 GHz+ contests and sprints
* Operate limited or unlimited
* One, two, or three operators
* Primarily operate while stopped, but be able to operate in motion on the bottom
  four bands
* Computerized logging and control as much as possible
* Reasonable power on all bands - ~ 200W on bottom four, ~ 50-100W on bottom four
  microwaves, ??? on 5/10/24 GHz
* Minimal setup and tear down time
* SSB, CW, and digital modes
* Keep kinds of coax connectors to a minimum
* Noise and line loss as low as is reasonable

Station 1 - 6m/1.25m
====================
* Kenwood TS-590SG for 6m & 1.25m transverter control                   - owned
* Darkstar 6m filter                                                    - owned
* Diplexer for filtering out 2m interference                            - owned
* 6m amp

* Ukranian 222 MHz transverter                                          - owned
* TE Systems 2210G amp w/pre-amp                                        - owned
* 1.25m filter                                                          - owned

* Headphones w/ boom, foot switch, speakers, key, etc.
* Logging computer w/ touch screen, keyboard, mouse, etc.
* PowerPole distribution

Station 2 - Lower microwaves
============================
* FT-818 for transverter input                                          - owned

* 33cm SG Labs transverter                                              - owned
* Sequencer
* Coax relay                                                            - $100
* 33cm pre-amp
* 33cm amp

* 23cm SG Labs transverter                                              - owned
* Sequencer
* Coax relay                                                            - $100
* Kuhne 23cm LNA                                                        - $212
  http://shop.kuhne-electronic.de/kuhne/en/shop/low-noise-amplifiers/MKU+LNA+132+AH++Super+Low+Noise+Preamplifier/?card=577
* 23cm amp

* 13cm SG Labs transverter                                              - on order
* Sequencer
* Coax relay                                                            - $100
* Kuhne 13cm LNA                                                        - $212
  http://shop.kuhne-electronic.de/kuhne/en/shop/low-noise-amplifiers/MKU+LNA+232+AH++Super+Low+Noise+Preamplifier/?card=588
* 13cm amp

* 9cm SG Labs transverter                                               - on order
* Sequencer
* Coax relay                                                            - $100
* Kuhne 9cm LNA                                                         - $150
  http://shop.kuhne-electronic.de/kuhne/en/shop/low-noise-amplifiers/MKU+LNA+341+AH++Super+Low+Noise+Preamplifier/?card=590
* 9cm amp

* Transverter switch                                                    - in production
* Green Heron RT-21dc rotor control                                     - $450
* Headphones w/ boom, foot switch, speakers, key, etc.
* Logging computer w/ touch screen, keyboard, mouse, etc.
* PowerPole distribution

* 6cm transverter
* ???
* 6cm amp

* 3cm transverter
* ???
* 3cm amp

* 1.2cm transverter
* ???
* 1.2cm amp

Station 3 - 2m/70cm
===================
* IC-9700 for 2m & 70cm
* OCI 146-4 bandpass filter                                             - $159
* OCI 440 bandpass filter                                               - $219
* 2m amp
* 70cm amp
* Headphones w/ boom, foot switch, speakers, key, etc.
* Logging computer w/ touch screen, keyboard, mouse, etc.
* PowerPole distribution

Mobile station
==============
* IC-7000 w/ remote head                                                - owned (need separation cable)
* Alinco DR-235T                                                        - owned
* Kenwood TM-D710GA (for FM and APRS beaconing)                         - $600

Misc.
=====
* Logging server w/ large display, keyboard, mouse, etc.
* Wireless access point
* Lights at each station
* Clock at each station
* Paper and pens for backup logging
* Tools (soldering station, coax making, wrenches, screwdrivers, etc.)
* Manuals for everything
* Checklists for setting up, tearing down, testing, etc.
* Whiteboards?
* ??? frequency reference
* DEM10-4 frequency reference divider                                   - $75

Antennas
========
* PAR Electronics 6m stressed moxon                                     - $125
* M2 2M7                                                                - owned
* DSEFO222-10RS                                                         - owned
* DSEFO432-15RS                                                         - $160
* DSE3319LYK (6' 890-910 MHz loop yagi)                                 - owned (3' model)
* DSE2325LYK (6' 1250-1300 MHz loop yagi)                               - owned (3' model)
* DSE1345LYK (6.5' 2.25-2.35 GHz loop yagi)                             - owned (4' model)
* DSE976LYK (8' 3.3-3.48 GHz loop yagi)                                 - owned (6' model)
* DSE rover frame                                                       - owned
* ??? rotator
* Penninger mast                                                        - owned
* M2 2M HO LOOP                                                         - $95
  (see also stacking kits, mag mount, etc.)
* M2 70CM HO LOOP                                                       - $74
  (see also stacking kits, mag mount, etc.)
* ??? 2m/70cm whip
* ??? 1.25m whip
* ??? Dish for 5/10/24 GHz

Power
=====
* 5v power system for misc. arduino devices
* 12v power system for radios and transverters
* 24v power system for some amps

Vehicle modifications
=====================